Machine Bases: Industrial, Heavy-Duty Aluminum Frames
Why AngleLock for Industrial Heavy-Duty Machine Bases?
AngleLock's industrial machine bases use modular aluminum frames and a patented, self-aligning connection system unlike any other. AngleLock machine bases are more adjustable than steel bases and more stable than T-slot machine bases.
See what value an AngleLock-grade design can do for your specific need:
Reliability
Never tighten a T-slot fastener again.
We use high-strength brackets, angled bolts, and exclusive engineering to ensure your assembly is precisely aligned. AngleLock-supported doors won't sag, and level tops and parallel planes are easy to achieve.
AngleLock is so reliable that you can reduce the bracketing and framework in your design, lowering its cost.
Unlike corrosion-prone steel, AngleLock’s architectural-grade anodized parts will not degrade over time like steel parts that rust would.
Adjustability
AngleLock modular framing reduces the hassle of welded steel and extruded T-slot framing:
- No expensive welding of new parts or cutting out old parts
- Connect & reconnect with instant precision
Have you been building machines with an adjustable enclosure and a welded, immovable base? Use AngleLock to create a fully adjustable mounting plate and single-piece assembly.
Safety & Access
AngleLock’s efficient design lasts longer than T-slots, and doesn’t put your employees and expensive machines at risk. The aluminum components don’t loosen or fail, and they’re lighter to work with than steel.
The reduced bracketry and cross-bracing also improves visibility and access.
Why AngleLock for Machine Bases?
Industrial settings often call for custom, highly engineered structural support.
AngleLock combines the modularity of T-slots with the rigidity of steel to create the ultimate investment into a safer, more productive facility:
Reliability
Never tighten a T-slot fastener again.
We use high-strength brackets, angled bolts, and exclusive engineering to ensure your assembly is precisely aligned for years. AngleLock-supported doors never sag, and level tops and parallel planes are easy to achieve.
AngleLock is so reliable that you can reduce the bracketing and framework in your design, lowering its cost.
Unlike corrosion-prone steel, AngleLock's architectural-grade anodized parts don’t release particles or rust that compromise clean environments and sensitive machines.
Adjustability
AngleLock modular framing reduces the hassle of welded steel and extruded T-slot framing:
- No expensive welding of new parts or cutting out old parts
- Connect & reconnect with instant precision
Assembly and teardown is about 50% faster.
Have you been building machines with an adjustable enclosure and a welded, immovable base? Use AngleLock to create a fully adjustable mounting plate and single-piece assembly.
Safety & Access
Even well-intentioned employees slip into bad habits, like ignoring a misaligned safety latch on an enclosure door.
AngleLock’s efficient design lasts many years longer than T-slots, and doesn’t put your employees and expensive machines at risk. The aluminum components don’t loosen or fail, and they’re lighter to work with than steel.
The reduced bracketry and cross-bracing also improves visibility and access.
Some Industries Where Industrial Carts Are Used
AngleLock produces industrial heavy-duty machine frames for:
- Manufacturing
- Automation
These are custom, highly engineered solutions. Our goal is for you to never tighten a fastener again. See other areas where AngleLock products are used on the Industries Served page.
Machinery Base & Frame Applications
You need a solution specially built for high-speed, high-stakes, and sensitive applications. AngleLock is the only solution of its kind for many industries:
- Manufacturing & automation
- Electronics
- Medical & science
- Aerospace & defense
- Architectural
- Events & recreation …
… And just about any other industry – use your imagination! Some think this is true with traditional T-slots too, but T-slots lack the engineering to support these applications.
Enclosures
Typical automation enclosures combine a steel base with T-slot guarding. AngleLock integrates the machine base and guarding, providing benefits not available elsewhere.
- Stability & strength – fewer connections needed, thus fewer points of failure
- Lower cost – base and enclosure share components
- Fast delivery – requires just one manufacturer
Automation
Automation exists to be time- and cost-efficient, yet traditional machine frame designs are anything but.
AngleLock adds reliability to:
- Robotic arm mounts
- Mobile machine pedestals & stands
- Guarding equipment
Even in applications with vibration, AngleLock connections maintain the precision crucial to sensors, jigs, mounts, and safety features. Humans don’t have to step in to realign or replace failing parts, meaning your automation stays automatic.
Manufacturing
From the mounting plate to the top, give your CNC or similar machine frame a seamless look with performance to match.
Enclosures & Manufacturing
Typical automation enclosures combine a steel base with T-slot guarding. AngleLock integrates the machine base and guarding, providing benefits not available elsewhere.
- Stability & strength – fewer connections needed, thus fewer points of failure
- Lower cost – base and enclosure share components
- Fast delivery – requires just one manufacturer
From the mounting plate to the top, give your CNC or similar machine frame a seamless look with performance to match.
.webp)
Automation
Automation exists to be time- and cost-efficient, yet traditional machine frame designs are anything but.
AngleLock adds reliability to:
- Robotic arm mounts
- Mobile machine pedestals & stands
- Guarding equipment
Even in applications with vibration, AngleLock connections maintain the precision crucial to sensors, jigs, mounts, and safety features. Humans don’t have to step in to realign or replace failing parts, meaning your automation stays automatic.
Mission-Critical Use
When a cheap fix isn’t enough to meet safety and quality requirements, steel and especially T-slot bases may not be enough.
AngleLock is built for jobs where failure isn’t an option:
- Medical & science
- Electronics
- Cleanrooms
AngleLock offers a precise, stable, and lightweight solution, particularly for equipment you want to elevate off the ground. The components’ anodized aluminum finish minimizes contaminating particles entering the air.